$54.29
$80.35
Description Specification Reviews The ORICO M.2 NVMe Cloner is a device designed to facilitate the cloning of NVMe-based M.2 solid state drives (SSDs). The cloner utilizes a distinctive dual-bay design, allowing it to accommodate two NVMe SSDs at the same time. Compatible with M-Key PCIe SSDs of capacity up to 8TB, the device provides an effective solution for large-scale data migration and backup. One notable feature of this cloner is its support for offline cloning which eliminates the need for a host computer or third-party software when duplicating data. It therefore improves convenience, saves time, and reduces potential data corruption risks that could arise from software conflicts. The ORICO NVMe Cloner is built with an aluminum chassis, which not only lends it a sleek, modern appearance, but also contributes to heat dissipation, ensuring stable, reliable operation over extended periods of use. The device leverages a USB-C interface for fast, efficient data transfers between the SSDs and a host computer. To sum up, the ORICO M.2 NVMe Cloner offers a practical and reliable solution for SSD cloning, with its dual-bay design, offline cloning capability, and sturdy aluminum construction. Why choose ORICO M.2 NVMe SSD Duplicator Cloner Dual Bay Docking Station ORICO external NVMe ssd docking station adopts USB 3.2 Gen 2 standard(USB C port), which supports an amazing data transmission rate up to 10Gbps. Support one-key offline clone can directly transfer the data from Disk 1 to Disk 2 without going through the computer.Max Support 2*4TB SSDs. ORICO M.2 ssd enclosure constructed with aluminum alloy which is better for absorbed heat dissipation. Support Plug and Play and Hot-Swapping. Easy installation and no driver required. Operating system compatibility: Windows, mac OS, and Linux. One-key Offline Clone This dual-slot m.2 NVMe duplicator can not only be used as an external NVME SSD to expand your storage capacity, but also can be used for offline backup. No need to connect to a PC, just plug in and press the start button then you can back up your important data. LED indicator can monitor the SSDs’ clone progress at any time. Note: please back up the data on the target disk before cloning to avoid losing important data. 5V/4A Power Adapter 5V/4A external power ensures its working stable and security.n 10Gbps High Speed ORICO USB 3.2 Gen2 m.2 cloner docking station is equipped with C to C cable and C to A cable, giving you more choices. The fastest transmission speed can reach about 1000MB/S with C to C cable and about 500MB/S with C to A cable. At the same time, it supports UASP acceleration protocol which can make your NVME SSDs run more quickly and stably. Max Support 2*4TB SSDs When ORICO M.2 dual NVMe duplicator connected to a computer, it can recognize two SSDs at the same time, supporting a single SSD max up to 4TB. Efficient Heat Dissipation Aluminum alloy keeps it tough and solid, and greatly improved hard drive durability by quickly dissipate the heat. Fit for M.2 PCle M-Key Specially designed for M Key M.2 NVME PCIe SSD of 2242/ 2260/ 2280/2230 Sizes. Back up Data,Suitable for Gaming,Clip Video For laptop,PC,PS4.TV and so on. LED Indicator,10Min Auto Sleep LED indicator light to clearly understand the working status.the anti-slip pad makes you more stable during use. Easy to assemble 1.Insert source disk into the SOURCE bay, then insert target disk into the TARGET bay.(Note: Target SSD Capacity>Source SSD Capacity.) 2.Connect the power adapter to the tool-free dual NVMe dock. Hold the clone button for 10-15 seconds until LED indicator begins to flash. 3.The indicator light will show the copy progress (25% -50% -75% -100%).When the clone is completed, the 4 LED lights will always be on. Please NOTE Do not use usb cable to connect to the computer during clone. If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors. Please back up the data on the target disk before copying to avoid loss of important data. Make sure that the two SSD disks can be recognized on the computer when plug in our nvme enclosure. If not, it could not clone. It’s normal that the aluminum case heats up, for the high-speed NVMe M.2 drives generate much heat while working. Do not touch the SSD during operation. Please refer to the changing diagram of temperature above. For the brand new SSD drive, it may not find the drive, because the brand new SSD drive should be formatted before first time using. And also need to make the SSD drive partition. To get the 10Gbps data transmission rate, the USB 3.2 interface on your PC should be USB 3.2 Gen 2. Some PCs only come with USB 3.2 Gen1 whose max speed is 5Gbps. Cloning is completed, target disk will enter the offline mode, in offline mode, the disk cannot be recognized when the PC is connected with the USB cable. Therefore, you should select online mode manually: right-click (computer/my computer/this computer) to select management, then select disk management in the popup dialog box, and you will see a disk in the offline state, then right-click it to choose the online mode. SKU: 3256806702800298 Categories: Computer Accessories, Consumer Electronics, Gadgets, Popular
Computer Accessories
